QMS 1725E, Reference

Page: 182 / 288

Fonts on the Hard
Disk
QMS 1725E Print System Reference 6-52
After the option is removed, remove the card from the slot and place
the printer back on line.
Downloading an Emulation
Optional emulations, such as LN03 and QUIC II, are available as
PostScript files on floppy disks. This section describes how to down-
load an optional emulation from the floppy disk to the printer’s hard
disk.
» Note: At least one hard disk (internal or external) must be installed on the
printer before you can download an emulation. If more than one hard disk is
available, the emulation automatically installs itself on the disk with the
most free storage space.
Once an emulation is downloaded, the only way to remove it is to
reformat the hard disk (using the Administration/Disk Operations/For-
mat Disk menu or PS Executive Series Utilities).
Next Scrolls through the list of attached
disks.
REMOVE OPTION
DSK:
x
Select Selects the disk and accesses the card
address from which removal information
is being read.
REMOVE SOURCE
CAR#: x
Select Prompts you to insert the font card in
one of the card slots below the printer’s
media cassette.
REMOVE OPTION
INSERT MEDIA
Begins reading data from the card and
removing the appropriate fonts from the
hard disk. This usually takes several
minutes.
REMOVE OPTION
READING DATA...
Acknowledges completion of the
installation process.
REMOVE OPTION
REMOVE COMPLETE
Menu Exits the Install Option menu and
returns to the Disk Operations menu.
DISK OPERATIONS
REMOVE OPTION