QMS 1725E, Reference

Page: 183 / 288

Emulations on the Hard
Disk
6-53 Printer Options
Procedure
1 If necessary connect the PC to the printer’s parallel or serial
port.
2 Turn on the printer, and wait for
IDLE
to appear in the mes-
sage window.
3 Insert the emulation disk in your PC’s 3.5" disk drive, and
change to that drive (for example, if you’re using the A drive,
type
a:
↵
).
4 Send the emulation to the printer’s hard disk.
n If your PC and printer are connected through the parallel port,
type
copy /b *.ps lpt #
↵
where
#
is 1 to 3. (/b refers to binary files.)
n If your PC and printer are connected through the serial port,
type
copy /b *.ps com #
where
#
is 1 to 4. (/b refers to binary files.)
5 When the downloading is complete, reboot the printer.
The emulation is ready to be used.
Emulations on the Hard Disk
An optional emulation can be installed in one of two ways:
n You can run an emulation by inserting the emulation card in the
card slot. When you remove an emulation card from the card slot,
you can no longer run that emulation.
n You can also copy the contents of an emulation card to an inter-
nal or external hard disk if one is installed. The following section