Qlogic QConvergeConsole CLI 8100 Series, User Manual

Page: 325 / 348

9–Offline Utilities
FlasUTIL
FE0254601-00 A 9-13
The Driver Configuration Main Menu will be displayed. Do not redirect the
output of the Driver Configuration protocol. Redirecting console output may
cause failures.
For a more detailed description of the EFI commands used in this procedure, refer
to the EFI shell documentation provided with your computer or the EFI project
documentation at
http://www.intel.com/technology/efi/index.htm .
For information about the EFICFG utility menus and selections, refer to Using the
QLogic EFI Configuration and Diagnostic Protocols document in the software
package.
FlasUTIL
The FlasUTIL utility is for offline QLogic 8100 Series Adapters installed in BIOS
servers. The FlasUTIL utility performs the following tasks:
 Read the multi-boot image
 Write the multi-boot image
 Verify the multi-boot image
 Verify the NVRAM
Installing FlasUTIL
To install the FlasUTIL utility:
1. Create a DOS-bootable disk or USB removable drive.
2. Download the QLogic 8100 Series Adapter multi-boot image file for your
server model and operating system from
http://driverdownloads.qlogic.com/ .
3. Extract the multi-boot image file, and copy it to the 3.5-inch disk or USB
removable drive. If your disk has insufficient space, you can delete text files
and .efi files from the multi-boot image before copying the folder.
NOTE:
 FlasUTIL is a DOS utility that requires the server to boot in DOS, using
either a DOS disk or a USB removable drive. Do not use the Microsoft
Windows DOS interface to execute these utilities.
 Some FlasUTIL features, such as the NVRAM options, are intended only
for QLogic Technical Support and, therefore, are not documented in this
guide.
 Do not run this utility from a drive connected to the QLogic 8100 Series
Adapter.