Qlogic QConvergeConsole CLI 8100 Series, User Manual

Page: 63 / 348

3–Installation in a Windows Environment
Installing Software
FE0254601-00 A 3-13
7. The Hardware Update Wizard starts. Select No, not this time , and then
click Next ( Figure 3-11 ).
Figure 3-11. Starting the Hardware Update Wizard
8. Select Install from a list or specific location (Advanced) , and then click
Next .
9. Click Have Disk , and then navigate to the folder containing the extracted
QLogic NIC driver that you downloaded in “Downloading QLogic Drivers” on
page 3-2 .
10. Select the setup information file (
qlge.inf
) from the list of QLogic NIC
driver files, and then click Open .
11. When the Hardware Update Wizard/Select a Device Driver dialog box
opens, click
Next .