4–Installation in a Linux Environment
Firmware Upgrades
FE0254601-00 A
4-25
3.
Under Flash, click
Update Entire Image
(
Figure 4-18
).
Figure 4-18. QConvergeConsole—Update Entire Image
4.
In the Open pop-up window, browse to the temporary folder that contains the
extracted multi-boot image, and then select the Flash file (
.BIN
).
5.
Click
Open
. The QConvergeConsole reads the multi-boot image to
determine the version information of the image file. A dialog box presents
the current multi-boot image version and the boot code version. This is not
the firmware version; it is the version of the multi-boot image. Verify that the
current boot code is an earlier version than the new boot code version. Click
Yes
to proceed with the boot code update; click
No
to cancel the update.
6.
Provide the password set by the system administrator, and then click
OK
The default password is
config
.
7.
When the update is complete, click
OK
.
Summary of Contents for QConvergeConsole CLI 8100 Series
