Qlogic QConvergeConsole CLI 8100 Series, User Manual

Page: 193 / 348

6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Windows Environment
FE0254601-00 A 6-25
d. After successfully removing the VLAN ID assignment, press ENTER to
return to the previous menu.
Figure 6-20. Removing VLAN ID Assignments
After a VLAN ID assignment has been removed, the corresponding QLogic VT-IM
Miniport Driver logical interface is removed from the Microsoft Windows Network
Connections window, and the local area connection for the teaming logical
interface will be enabled again.
PXE Boot
PXE boot code is a part of the QLogic 8100 Series Adapter multi-boot image that
allows a networked server to boot with the images provided by remote servers.
Prerequisites for PXE Boot
PXE boot requires the following:
 A client server with a PXE-compliant BIOS or UEFI implementation and a
QLogic 8100 Series Adapter installed. This server will boot through PXE with
Microsoft Windows.
 A DHCP or proxy DHCP server that can provide an IP address and boot
server list to the client server.
 A PXE boot server to deliver the PXE execution environment and the
operating system images to the client server. It is possible to configure a
single physical server as both a DHCP and a boot server.
The following tasks must be completed in sequence to enable a networked server
to boot with the images provided by remote servers across the network using PXE
boot.