Qlogic QConvergeConsole CLI 8100 Series, User Manual

Page: 326 / 348

9–Offline Utilities
FlasUTIL
9-14 FE0254601-00 A
4. Boot the server with the QLogic 8100 Series Adapter using the disk or USB
removable drive.
5. Change to the directory containing the multi-boot image on the disk or USB
removable drive.
Using FlasUTIL
The FlasUTIL utility has a command line interface and a menu interface. The
menu interface is function specific, and is not described in this guide.
The FlasUTIL command has the following format:
flasutil options
If you omit the options, the command displays all QLogic adapters and their I/O
addresses.
Table 9-4 describes the FlasUTIL command line options; these
options are not case sensitive.
Table 9-4. FlasUTIL Command Line Options
Option Function
/? Display all FlasUTIL command line options
xxxx Open the menu interface for the adapter at address xxxx .
/L xxxx Write NVRAM to the adapter at address xxxx . If you omit the
address, the command writes the NVRAM to all adapters.
/F xxxx Write BIOS code to the adapter at address xxxx . If you omit the
address, the command writes BIOS code to all adapters. If an
adapter already contains a valid BIOS image, the existing
NVRAM contents are preserved.
/FR xxxx Write firmware to the adapter at address xxxx . If you omit the
address, the command writes firmware to all adapters on the
server.
/D xxxx Copy NVRAM to a file (QLxxNVR.SAV) on the adapter at
address
xxxx .
/W xxxx filename Copy the BIOS image from the adapter at address xxxx , to the
file given by filename (for example,
QL xx ROM.SAV
).
/N filename .dat Use filename .dat as the default NVRAM update image, instead
of
Q xxxxxx .DAT
.
/O filename .ext Use filename .ext as the multi-boot image, instead of
x 8 xyyyyy .bin
.
/I Ignore the subsystem ID. This may be required if FlasUTIL does
not recognize the adapter.