Qlogic QConvergeConsole CLI 8100 Series, User Manual

Page: 137 / 348

5–Installation in a VMware Environment
Installing the FCoE and Networking Drivers
FE0254601-00 A 5-3
Figure 5-1. Adapter Hardware
12. Verify the LEDs on the adapter to ensure proper operation. For information
about LED indications, refer to
Appendix A .
Installing the FCoE and Networking Drivers
The QLogic 8100 Series Adapter driver is not included with the VMware
ESX™/ESXi4.0 operating system. Therefore, you must download the drivers for
VMware ESX/ESXi 4.0 from the QLogic Web site at
http://driverdownloads.qlogic.com/ .
To download and install the FCoE and networking drivers:
1. Click QLogic Products .
2. Click the by Operating System radio button above the selection list.
3. Under Adapters, select Converged Network Adapters in the first column of
the selection list.
4. Select VMware in the second column of the selection list.