Chapter 4 Maintenance of Mechanical Components
Document Version V1.0.1 (09-21-2022)
23
②
Use 4 mm Allen wrench to loosen the 2*M5 fastening screws of the flange
at the end of the screw, remove the end flange in downward direction and
properly place it, as shown in the figure below.
③
Use the flat-nose pliers to remove the flat key from the screw.
④
Use 4 mm Allen key to loosen the fastening screws of the bearing fixing
ring, remove the bearing fixing ring and the connecting fastener in
downward direction.
⑤
Use the straight screwdriver to remove the fastening screws from the
