Appendix A Programming Guide
A-13
PJL VARIABLE
(cont.)
VALUES
PAPERSELECT
RECOGNIZE, ONLYPJL, IGNORE
PATHSELECT
RECOGNIZE, IGNORE
FUSERTEMP
LOW, MIDDLE, HIGH
DENSITY
(
MICR
only PP 4050 MICR)
LOW, MIDDLE, HIGH, ECOTOP;
MICRLOW, MICRMIDDLE, MICRHIGH
VERSHIFT
-50, -49, ....., -1, 0, 1, 2, ....., 50
HORSHIFT
-50, -49, ....., -1, 0, 1, 2, ....., 50
CUTSHIFT
-50, -49, ....., -1, 0, 1, 2, ....., 50
PERSONALITY
PCL, HEXDUMP
AUTOFORMFEED
OFF, 1, 2, ....., 120
AUTOFORMCUT
OFF, 1, 2, ....., 120
TRACTORPOOL
ON, OFF
JOBSEPARATION
ON, OFF
TRACTORCHANGECUT
ON; OFF
REPRINTLASTPAGE
ON, OFF
Note:
All parameter which can be programmed with PJL Variables can also be
configured by the Operator Panel of the printer.
For detailled description of parameters see chapter
4 Explanation of
Individual Menu Items
Appendix A Programming Guide
A-14
The following variables can be programmed by the PJL command:
S
@PJL DEFAULT
”variable” = ”value”
PJL VARIABLE
VALUES
POWERSAVE
OFF, 15, 30, 45, 60
KEEPTEMPHIGH
ALWAYS, 0.5, 1, ....., 60 (in steps of 0.5 sec)
ALARMBELL
ON, OFF
Note:
only valid with panel version 0.26
LANG
ENGLISH, GERMAN, FRENCH, SPANISH
MENUACCESS
ALL, PROFILESONLY, NONE
Note:
These variables can not be used by the PJL COMMAND SET.
For detailled description of parameters see Chapter
4 Explanation of
Individual Menu Items