Configuring the Printer
3-17
INFO MENU
Entry Point =
TEST MODE ---> INFO MENU
Info Menu
Function / Action
Printer TYPE
* (depending on printer model)
ENGINE ID
Print out of the actual Engine Firmware
revision
FIRMWARE VERSION
Print out of the actual PPOS revision
STACKER VERSION
Print out of the actual Stacker Firmware
PANEL VERSION
Print out of the actual Operator Panel
Firmware
revision
DEFELOPER INFO
Usage grade in % of the total life cycle of
the
Developer
OPC INFO
Usage grade in % of the total life cycle of
the
OPC
FUSER INFO
Usage grade in % of the total life cycle of
the
Fuser
* 50 or 50/300 or 50/600
Configuring the Printer
3-18
3.6 Configuration Programs
For printer configuration a program
Profiler
is available.
By means of this program , all profiles can be retrieved, edited
and therafter transmitted back to the printer.
For setting up the network interface a tool
InterCon NetTool
is available.
You will find both programs under
www.psi-laser.de/tools.php?lang=en
.