PSI PP 4050, User Manual, Page: 48 / 120

Explanation of Individual Menu Items
4-23
S RESET DEVELOPER INFO
S RESET OPC INFO
S RESET FUSER INFO
In addition to the mechanical page counter the firmware has incorporated an
individual software page counter which count the usage grade for each
consumable. This information is calculated in percentage of the total lifecycle
of the device and is displayed in the info menu and on the configuration test
page. When the end of the lifetime is reached a value of 100% is indicated.
After replacing the worn out consumable the user must reset the associated
counter. The associated counter can be reset by
RESET DEVELOPER
INFO , RESET OPC INFO , or RESET FUSER INFO .
Important Note 1:
The lifetime of a consumable is determined by the rotation
and the movement of the mechanical parts. If a print is
stopped the paper moves back into the parking position. This
retracting is influencing the OPC life time and is registered in
the lifecycle counting by three additional pages.
Important Note 2:
After replacing the Developer Unit, the PC Cartridge, or the
Fuser Unit the above mentioned Reset functions have to be
called up.
4.3.2 CLOCK MENU (only PP 4050XP/PP4650)
Following settings are possible:
S
WEEKDAY
S
DAY
S
MONTH
S
YEAR
S
HOUR
S MINUTE
S SECOND
Explanation of Individual Menu Items
4-24
4.4 Menu Mode TEST MODE
Within the TEST MODE general printer status informations can be accessed
and test printouts can be generated.
The TEST MODE is split into:
S TEST MENU
S
INFO MENU
4.4.1 Submenu TEST MENU
S
PANEL TEST
Use this point to check all Operator Panel display functions.
S
SELF TEST
This selection starts the printout of the test page with the actual configuration
settings of the actual Profile and diagonal character test (see Paragraph
3.2.1
How to Start the SELF TEST )
S CONT SELF TEST (Continuous Selftest)
If this function is selected the printer continuously prints the test page (see
SELF TEST) until the
key is pressed.
S
CONFIG. PRINT (Configuration Print)
This selection starts a printout of all Profiles with the information about the
PAPER MENU, PCL MENU, GENERAL MENU, and the CONFIG. MENU
(see Paragraph
3.3 Printout of all Profiles )