Maintenance
5-9
Note:
Don´t destroy the small plastic lip above the toner output of the
Developer Unit (1).
S
Insert a new Developer Unit (1) and fix it by pressing down the lever (9).
S
Pull the Toner Cartridge (7) completely off the developer.
Note:
An orange tape (8) is visible which is fixed to a foam block that closes
the toner entrance into the developer.
S
Remove the foam block from the Developer Unit.
S
Activate the Toner Cartridge as described in paragraph
5.1.1 Refilling the
Toner
.
Note:
Change into the
OFFLINE
mode and reset the
Developer INFO
(see
BASIC SETTINGS
º
º
º
º
CONFIC MENU
).
Maintenance
5-10
5.2.2 Replacing the Transfer Charge Unit
Note:
The Transfer Charge Unit is a delicate equipment; the wire can break
easily!
S
Press first
.
OFFLINE
will be displayed.
S
Open the front (3) cover.
S
Loosen the screw (2) and remove the Transfer Charge Unit (1)
Note:
Now there are no obstacles to remove the Ozone Filter; see point
5.2.3
.
S
Insert a new Transfer Charge Unit (1) by using the iron band guides at both
sides and fix it with the screw (2).
S
Close front cover (3).