Printer Operation
2-9
Now you are at the Subfunction level. Movement in both directions is possible
by:
S
pressing the quick set up wheel
to enter the next lower level
S
pressing the key
to enter a higher level.
If the selection is e.g.
PCL MENU
the display will indicate:
PCL MENU
FONT NUMBER
PITCH
SYMBOL SET
The next, but not visible items are:
LINE SPACING
TOP MARGIN
LEFT MARGIN
RIGHT MARGIN
TEXT LENGTH
PERF. SKIP
$$ COMMANDS
Now select the requested menu item of this menu (for example
PERF. SKIP
) by
turning the with the quick set up wheel
and press the same buttom to enter
the lowest level.
At the last level to select/confirm values, the asterisk (*) at the right indicates the
actual selection.
PERF. SKIP
OFF
*
ON
By turning the quick set up wheel
to the left or right you are able to change
from OFF to ON.
2.2.2 To Confirm and Save Selection
S
press
; the confirmed value is displayed with an asterisk (*) in the last
position.
Note:
All newly selected values must be confirmed and saved immediately
by pressing this key!
The Menu Mode is left by pressing the
key.
Note:
All actual parameter settings can be printed with the function
SELF TEST
in the
TEST MODE
.
Printer Operation
2-10
2.2.3
Example to Start a Self Test
Panel keys are now used and associated display messages are shown for the
next steps. The following example demonstrates how to do so:
Key
Display
1.
Switch the printer on.
ONLINE (1)
16.00 x 12 INCH
LOWER --> BOTTOM
2.
Press
(90)
OFFLINE (1)
SELECT PROFILE
CUT FORM
FORM FEED
Note:
The number in brackets behind ONLINE or OFFLINE indicates
the selected Profile.
3.
Turn
(91) until
OFFLINE (1)
TEST MODE
RESET PRINTER
SELECT PROFILE
4.
Press
(91)
TEST MODE
select the TEST MODE
TEST MENU
INFO MENU
5.
Press
(91)
TEST MENU
select TEST MENU
PANELTEST
SELF TEST
CONT SELF TEST
6.
Turn
(91)
TEST MENU
SELF TEST
CONT SELF TEST
CONFIG. PRINT