Troubleshooting and Diagnostics
Display
That means...
Measure
6-11
80 EXCHANGE OPC
PC-Cartridge has reached
its end of life
Replace the PC-Cartridge *)
82 EXCHANGE
DEVELOPER
Developer has reached its
end of life
Replace the Developer *)
83 EXCHANGE FUSER
Fuser has reached its end
of life
Replace the Fuser *)
90 LD STACKER Vx.xx
Message during loading a
new stacker firmware
91 UPD. STACKER FW
Message during loading
the stacker firmware
92 STACK. COM ERROR
Communication error
between printer and
stacker;
Cable defective
- Check power cable
- Check interface cable
- Power OFF/ON again
93 STACK. PROG. ERR
Program error in the
stacker
- Power OFF/ON again
- Call service to load
new firmware
94 STACK. INTERN-ERR.
Program error in the
stacker
- Power OFF/ON again
- Call service
95 SERVICE STACK. 0
Hardware error
- Power OFF/ON again
- Ensure that mechanics
are not blocking
- Call service
*) After replacing the Developer Unit, the PC Cartridge, or the Fuser Unit the
Reset functions (CONFIG MENU
º
BASIC SETTINGS) have to be called
up.
Remove all transportation locks before replacing the units.