PSC Scanning SP*ACE, User Manual

Page: 8 / 190

4
SP*ACE User's Guide
S
LEEP
M
ODE
Sleep Mode is the term used to describe the scanner's condition after
the motor and/or laser have automatically switched off due to a
prolonged period of inactivity.
P
ROGRAMMING
M
ODE
Programing Mode is a special condition used to change scanner
features such as the user interface, scanner to host interface param-
eters, or laser and motor time-outs. Programming Mode also
disallows scanning of normal barcodes or sending data to the host.
A set of special programming barcodes are contained in the Pro-
gramming Kit (R44-1140) that is available from PSC or your dealer or
distributor.
R
OTATING THE
S
CAN
H
EAD
The SP* ACE scanner's head can be
rotated 270
°
degrees (180
°
for-
ward and 90
°
backward) to
accommodate many scanner
mounting options. Follow the
instructions below to rotate the
scan head.
➀
Grasp the scanner as shown.
➁
Pull the scan head to the right
and the gap between the two
halves will open. This releases the
locking mechanism.
➂
Rotate the scanner head to the
desired position and release the
head. If the gap doesn't close, rotate
the head slightly until the gap
closes.
➀
SCANNER
BODY
SCANNER
HEAD
➁
GAP
➂