Protech Systems PA-6822, User Manual

Page: 106 / 250

Chapter 3 Software
ESC V n
[Name] Turn 90 degree clockwise rotation mode on/off
[Format]
ASCII ESC V n
Hex. 1B 56 n
Decimal 27 86 n
[Range]
0
≤
n
≤
1, 48
≤
n
≤
49
Initial Value n = 0
[Description]
Specifies or cancels character 90 degree clockwise rotation.
Underlines are not applied to characters rotated 90 degrees clockwise even
when ESC !,ESC - or FS - commands are given.
If 90 degree clockwise rotation is specified, double-wide and double-tall
commands in the 90 rotation mode enlarges characters in the opposite
directions to double-wide and double-tall commands.
This command only affects printing in standard mode.
In page mode, this command is only effective for the setting.
This command is effective for ANK and Chinese characters.
n Function
0, 48 Turns off 90 degree clockwise rotation mode

1, 49 Turns on 90 degree clockwise rotation mode

ESC W xL xH yL yH dxL dxH dyL dyH
[Name] Set printing area in page mode
[Format]
ASCII ESC W xL xH yL yH dxL dxH dyL dyH
Hex. 1B 57 xL xH yL yH dxL dxH dyL dyH
Decimal 27 87 xL xH yL yH dxL dxH dyL dyH
[Range]
0
≤
xL, xH, yL, yH, dxL, dxH, dyL, dyH
≤
255
However, this excludes dxL = dxH = 0 or dyL = dyH = 0
Initial Value xL = xH = yL = yH = 0
[Description]
Sets the print region position and size.
Horizontal direction starting point [(xL + xH x 256) x basic calculated pitch]
Vertical direction starting point [(yL + yH x 256) x basic calculated pitch]
Horizontal direction length [(dxL + dxH x 256) basic calculated pitch]
Vertical direction length = [(dyL + dyH x 256) basic calculated pitch]
(X+Dx-1)<576 (3 inch,basic calculated pitch=1);(X+Dx-1)<432 (2 inch,basic
calculated pitch=1)
(Y+Dy-1)<768 (basic calculated pitch=1);
If (horizontal starting position + printing area width) exceeds the printable
area, the printing area width is automatically set to (horizontal printable
area - horizontal starting position).
If (vertical starting position + printing area height) exceeds the printable
area, the printing area height is automatically set to (vertical printable area
- vertical starting position).
PA-6822 Series User Manual Page