Protech Systems PA-6822, User Manual

Page: 117 / 250

Chapter 3 Software
GS W nL nH
[Name] Set printing area width.
[Format]
ASCII GS W nL nH
Hex. 1D 57 nL nH
Decimal 29 87 nL nH
[Range] 0
≤
nL
≤
255, 0
≤
nH
≤
255
[Description]
Sets the print region width specified by nL and nH.
Print region width is [(nL + nH x 256) x basic calculated pitch].
[(nL + nH x 256) x basic calculated pitch] >=24.
GS \ nL nH
[Name] Set relative vertical print position in page mode.
[Format]
ASCII GS \ nL nH
Hex. 1D 5C nL nH
Decimal 29 92 nL nH
[Range]
0 ≤ nL ≤ 255
0
≤
nH
≤
255
[Description]
Specifies the character vertical direction position for the data expansion starting
position using the relative position based on the current point in page mode. This
sets the position moved from the current position to [(nL + nH x 256) x basic
calculated pitch] for the next data expanding starting position.
When not in page mode, this command is ignored.
GS a n
[Name] Enable/disable Automatic Status Back (ASB).
[Format]
ASCII GS a n
Hex. 1D 61 n
Decimal 29 97 n
[Range]
0
≤
n
≤
255
Initial Value n = 0
[Description]
Selects the statuses that are targeted for transmission with the automatic status
function (ASB: Automatic Status Back).
Bits Statuses Targeted for ASB “0” “1”
7 Undefined --- ---
6 Undefined --- ---
5 Undefined --- ---
4 Undefined --- ---
3 Continuous Paper Detector Invalid Valid
2 Error Invalid Valid
1 ONLINE/OFFLINE Status Invalid Valid
0 Drawer kick connector pin #3 Invalid Valid
PA-6822 Series User Manual Page