Protech Systems PA-6822, User Manual

Page: 99 / 250

Chapter 3 Software
ESC FF
[Name] Print data in page mode.
[Format]
ASCII ESC FF
Hex. 1B 0C
Decimal 27 12
[Range] N/A
[Description]
Prints all buffered data in the print area collectively in page mode.
This command is enabled only in page mode.
Holds the following information after printing.
a. Expanded data
b. Character print direction selection in page mode (ESC T)
c. Set print region (ESC W) in the page mode.
d. Character expansion position
ESC SP n
[Name] Set right-side character spacing.
[Format]
ASCII ESC SP n
Hex. 1B 20 n
Decimal 27 32 n
[Range]
0
≤
n
≤
255
Initial Value n = 0
[Description]
This command sets the size of space to right of character.
Right space = n × [horizontal motion units].
ESC ! n
[Name] Select print mode(s).
[Format]
ASCII ESC ! n
Hex. 1B 21 n
Decimal 27 33 n
[Range]
0
≤
n
≤
255
Initial Value n = 0
[Description]
This command selects print mode(s) with bits having following meanings.
Bit On / Off Hex Decimal Function
0 Off 00 0 Character font A selected.
On 01 1 Character font B selected.
1 Off 00 0 Not used. Fixed to Off.
2 Off 00 0 Not used. Fixed to Off.
3 Off 00 0 Emphasized mode not selected.
On 08 8 Emphasized mode selected.
4 Off 00 0 Double-height mode not selected
On 10 16 Double-height mode selected
5 Off 00 0 Double-width mode not selected.
On 20 32 Double-width mode selected.
6 Off 00 0 Not used. Fixed to Off.
7 Off 00 0 Underline mode not selected.
On 80 128 Underline mode selected.
PA-6822 Series User Manual Page