Protech Systems PA-6822, User Manual

Page: 93 / 250

Chapter 3 Software
COMMAND LIST
Standard Commands
Control
Codes
Hexadec
-imal
Codes
Function
Stand
-ard
Mode
Page
Mode
<HT> 09 Horizontal tab V V
<LF> 0A Print and line feed V V
<FF> 0C
Print and recover to standard mode
(in page mode)
Ignored V
<CR> 0D Print and carriage return V V
<CAN> 18 Cancel print data in page mode Ignored V
<DLE EOT> 10 04 Real-time status transmission V V
<DLE ENQ> 10 05 Real-time request to printer V V
<DLE DC4> 10 14 Real-time output of specified pulse V V
<ESC FF> 1B 0C Print data in page mode Ignored V
<ESC SP> 1B 20 Set right-side character spacing V V
<ESC !> 1B 21 Select print mode(s) V V
<ESC $> 1B 24 Set absolute print position. V V
<ESC *> 1B 2A Select bit image mode V V
<ESC -> 1B 2D Turn underline mode on/off. V V
<ESC 2> 1B 32 Select default line spacing V V
<ESC 3> 1B 33 Set line spacing V V
<ESC => 1B 3D Select peripheral device V V
<ESC @> 1B 40 Initialize printer V V
<ESC D> 1B 44 Set horizontal tab position V V
<ESC E> 1B 45 Turn emphasized mode on/off V V
<ESC G> 1B 47 Turn double-strike mode on/off V V
<ESC J> 1B 4A Print and feed paper V V
<ESC L> 1B 4C Select page mode
◎
Ignored
<ESC M > 1B 4D Select character font V V
<ESC R> 1B 52 Select an international character set V V
<ESC S> 1B 53 Select standard mode Ignored V
<ESC T> 1B 54 Select print direction in page mode
▲
V
<ESC V> 1B 56
Turn 90 degree clockwise rotation
mode on/off
V
▲
<ESC W> 1B 57 Set printing area in page mode ▲ V
<ESC \> 1B 5C Set relative print position V V
<ESC a> 1B 61 Select justification
◎
▲
<ESC c 3> 1B 63 33
Select paper sensor(s) to output paper-end
signals
V V
<ESC c 4> 1B 63 34 Select paper sensor(s) to stop printing V V
<ESC c 5> 1B 63 35 Enable/disable panel buttons V V
<ESC d> 1B 64 Print and feed n lines V V
<ESC i> 1B 69 Full cut V Disabled
<ESC m> 1B 6D Partial cut V Disabled
<ESC p> 1B 70 General pulse V V
<ESC t> 1B 74 Select character code table V V
PA-6822 Series User Manual Page