Protech Systems PA-6822, User Manual

Page: 110 / 250

Chapter 3 Software
ESC { n
[Name] Turns upside-down printing mode on/off.
[Format]
ASCII ESC { n
Hex. 1B 7B n
Decimal 27 123 n
[Range]
0
≤
n
≤
255
Initial Value n = 0
[Description]
Specifies or cancels upside-down printing.
Cancels upside-down printing when n = <*******0>H.
Specifies upside-down printing when n = <*******1>H.
n is effective only when it is the lowest bit.
This command is effective only when input at the top of the line when
standard mode is being used.
This command has no affect in page mode. In page mode, this command is
only effective for the setting.
Upside-down printing rotates line data 180 degrees.
n Upside-down mode
0 Turned off
1 Turned on
FS p n m
[Name] Print NV bit image.
[Format]
ASCII FS p n m
Hex. 1C 70 n m
Decimal 28 112 n m
[Range]
1
≤
n
≤
255
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description]
Prints NV bit image n using mode m.
n specifies the NV bit image number.
m specifies the bit-image mode.
NV bit image is a bit image defined in non-volatile memory by FS q and
printed by this command.
This command is ignored when the specified NV bit image n is undefined.
m Mode
0, 48 Nornal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
FS q n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
[Name] Define NV bit image.
[Format]
ASCII FS q n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
Hex. 1C 71 n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
Decimal 28 113 n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
[Range]
1 ≤ n ≤ 255
1 ≤ (xL + xH ×256) ≤ 54 (0 ≤ xL ≤ 54, xH=0) for 2 inch
1
≤
(xL + xH ×256)
≤
72 (0
≤
xL
≤
72, xH=0) for 3 inch
1
≤
(yL + yH ×256)
≤
96 (0
≤
yL
≤
96, yH=0)
0
≤
d
≤
255
k = (xL + xH × 256) × (yL + yH × 256) × 8
PA-6822 Series User Manual Page