Protech Systems PA-6822, User Manual

Page: 95 / 250

Chapter 3 Software
Kanji Control Commands
(when the Japanese, Simplified Chinese, Traditional Chinese, or Korean model
is used)
Control
Codes
Hexadec
-imal
Codes
Function
Stand
-ard
Mode
Page
Mode
<FS !> 1C 21 Set print mode(s) for Kanji characters V V
<FS &> 1C 26 Select Kanji character mode V V
<FS -> 1C 2D
Turn underline mode on/off for Kanji
characters
V V
<FS .> 1C 2E Cancel Kanji character mode V V
<FS S> 1C 53 Set Kanji character spacing V V
<FS W> 1C 57
Turn quadruple-size mode on/off for Kanji
characters
V V
Command classification
Executing : Printer executes the command, which does not then affect the following data.
Setting : Printer uses flags to make settings, and those settings affect the following data.
○
: Enabled.
◎
: Enabled only when the command is set at the beginning of a line.
●
: Enabled only when data is not present in the printer buffer.
▲
: Only value setting is possible.
Disabled: Parameters are processed as printable data.
Ignored: All command codes including parameters are ignored and nothing is executed.
COMMAND DETAILS
STANDARD COMMAND DETAILS
HT
[Name] Horizontal tab
[Format]
ASCII HT
Hex. 09
Decimal 9
[Range] N/A
[Description]
Moves print position to next horizontal tab position.
This command is ignored if the next tab is not set.
If the next tab position exceeds the print region, the print position is moved
to [print 1].
The horizontal tab position is set by ESC D (Set/cancel horizontal tab
position).
When the print position is at the [print region + 1] position and this
command is received, the current line buffer full is printed and a horizontal
tab is executed from the top of the next line.
The initial value of the horizontal tab position is every 8 characters of Font
A (the 9th, 17th, 25
th
positions, etc.)
PA-6822 Series User Manual Page