Protech Systems PA-6822 User Manual Download Page 2

Page: 2 / 250

PA-6822 POS System

COPYRIGHT NOTICE & TRADEMARK

All trademarks and registered trademarks mentioned herein are the property of their

respective owners.

This manual is copyrighted

in Oct

. 201

. You may not reproduce or transmit in any

form or by any means, electronic, or mechanical, including photocopying and

recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up the system. The

information contained in this document is subject to change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

PA-6822 Series User Manual

Page 1

Summary of Contents for PA-6822



























































































































































































































































Search results

Summary of Contents for PA-6822

Reviews:

Related manuals for PA-6822

Brands by name

Popular brands

Protech Systems PA-6822, User Manual

Search results

Summary of Contents for PA-6822

Reviews:

Related manuals for PA-6822

Brands by name

Popular brands