Promise Technology Vess A Series Product Manual Download Page 155

Page: 155 / 259

Viewing Runtime Events (CLU)

To display Runtime Events:

Main Menu

Event Viewer

The log of Runtime Events appears. Events are added to the top of the list. Each item

includes:

•

Sequence number

– Begins with 0 at system startup.

•

Device

– Disk Array, Logical Drive, Physical Drive by its ID number.

•

Severity

– See the table above.

•

Timestamp

– Date and time the event happened.

•

Description

– A description of the event in plain language.

Press the up and down arrow keys to scroll through the log.

Clearing Runtime Events (CLU)

To clear the Runtime Event log:

Main Menu

Event Viewer

Clear Runtime Event Log

Press Y to confirm.

143

Managing with CLU

Vess A6120 Product Manual

Summary of Contents for Vess A Series



































































































































































































































































Search results

Summary of Contents for Vess A Series

Reviews:

Brands by name

Popular brands

Promise Technology Vess A Series, Product Manual

Search results

Summary of Contents for Vess A Series

Reviews:

Brands by name

Popular brands