english
41
www.projectiondesign.com
8 Test patterns
The multi image processor has several built-in test patterns for easier setup. This tool can
be used to tune the geometry (warping) in a setup to match reference points, aspect ratio,
ensure visual correctness and to configure 3D image generators for shapes like cylinders and
domes. The test patterns are:
•
Circles. Add circle to your calibration view to visually configure for aspect ratio.
•
Grid (Pixel). Specify a grid with height and width (in pixels) of all cells in the grid.
•
Grid (Angle). Specify a grid with horizontal and vertical degrees for setup in domes or
cylinders.
Multiple test patterns can be used simultaneously.
Figure 8-1. Adding test patterns
To add a test patterns to the calibration view, click “Test Images” in the actions toolbar. See
Figure 8-1. The window in Figure 8-2 will appear.
Figure 8-2. Test Image Setup window
Summary of Contents for WB1920
