english
11
www.projectiondesign.com
4 Installation and setup
The following section outlines the general requirements to supporting equipment in order to
run the ProNet Calibrator and successfully setting up a multi image based projection system.
4.1 System requirements
ProNet 2.0 – required to set up and operate multi image processing system processors,
works with Microsoft Windows® operating systems only. The following versions are sup-
ported:
•
Windows XP (32-bit only), SP xx or
•
Windows Vista (32- or 64-bit)
•
Windows 7 (32- or 64-bit)
In addition, Microsoft .NET Framework 3.5 or later must be installed.
Any standard computer capable of running the above operating systems should work, but for
best performance, the computer running ProNet 2.0 should have at least:
•
Intel® Dual Core™ architecture or similar.
•
2 GB of RAM
•
200 MB of free disk space
•
1.0 Gigabit Ethernet interface
Note!
For the ProNet application to be displayed correctly, 96 DPI must be used (Windows
Default).
Summary of Contents for WB1920
