Primera 510212, User Manual

Page: 34 / 96

Section 4: Ribbon and Print Media
29
Digital Label Press 3 User’s Manual
NOTE:
To ensure proper operation, the media MUST be centered on the platen roller! If after
normal operation your paper is not centered, adjust the media bias lever on the back of the
Media Input Assembly.
14. Making certain the paper is tight and centered in the press, insert the Print
Pressure Bracket back into its proper position inside the press. Be sure the Print
Pressure Bracket is seated properly on top of the Chassis Tab on each side of
the printer's interior as shown.
Media Bias Lever
Print Pressure Bracket
Chassis Tab
???
Impressa3.qxd 10/22/01 9:29 PM Page 29