Primera 510212, User Manual

Page: 21 / 96

16
Section 3: Getting Started
Digital Label Press 3 User’s Manual
3. Place the Blade Holder into the Cutter Arm and tighten the gold-colored
Securing Knob by turning it toward the front of the printer. Tighten only until
the Blade Holder fits securely within the Cutter Arm. To verify proper
tightness, try rotating the Blade Holder clockwise within the Cutter Arm. If it
rotates, the Securing Knob needs to be further tightened. Do not over-tighten!
G. INSTALLING THE MEDIA INPUT ASSEMBLY
Press's Media Input Assembly houses the supply roll of print meda and has
sensors that identify the type of material as well as the number of sheets remaining
on the roll. The Media Input Assembly connects to the press as follows:
1. Lock the Media Input Assembly in place on the left-hand side of the press. The
assembly has extensions on either side that engage securing notches on the
press.
Impressa3.qxd 10/22/01 9:29 PM Page 16