Primera 510212, User Manual

Page: 38 / 96

Section 5: Connecting the Press
33
Digital Label Press 3 User’s Manual
A. RUNNING THE SELF TEST
Now that print supplies are installed and power is applied, a self-test should be
performed to check for proper operation of the printer. Press is capable of doing a
specific self test print for monochrome resin, 3-color resin, and dye-sublimation.
The following steps describe how to perform a self-test print:
1. Make sure the appropriate supplies are properly loaded, that power is ON, and
that the Top Cover and Cutter Door are shut.
2. Repeatedly press the " Menu " button on the control panel until the LCD reads:
3. Press the ENTER button on Press's Control Panel.
4. Press MENU again to cycle through the three types of self-tests. MONO RESIN
is the self test for #300 Series Monochrome ribbon and #300 Series Vinyl. 3
COLOR RESIN is the self test for the #300 Series 3-Color Paneled Resin Ribbon
and #300 Series Vinyl. 3 COLOR DYE SUB is the test for the #200 Series 3-
Color Paneled Dye Sublimation ribbon with the #200 Series Dye Sublimation
Adhesive Backed Receiver media. Once the proper section is displayed on the
LCD, press the Enter button.
Connecting the Press
5
Impressa3.qxd 10/22/01 9:29 PM Page 33