Accent 1000 User’s Guide-Empower
22
Removing the Stand
If you do not want to use the stand, you can remove it from the back of
the device. You can reattach it at any time.
1.
Place the device face-down on a flat surface.
2.
Using a Phillips screwdriver, remove the screws from the holders at
the top of each of the stand’s legs.
3.
Pull the holders free and put the holders and screws in a safe place
in case you need to use them later. Alternatively, you can reinsert
the screws in the holes in the device.
Loose holders and screws could be a choking hazard.
4.
Spread the legs apart to pull them out of the holes in the back of
device.
5.
Pull the stand free and put it in a safe place in case you need to use
it later.
Important!
If you reattach the stand, be sure to secure the legs with
the holders to prevent someone from pulling it loose accidentally.
