Accent 1000 User’s Guide-Empower
32
Attaching the Frame More Securely
If you do not expect to remove and reattach the frame to the device
frequently, you may want to insert the original screws in the top and
side holes of the frame. If you expect to remove and reattach the frame
to the device frequently, you may not want to use the screws.
1.
Place the device face-down on a flat surface.
2.
Insert the two small screws that you removed earlier (page 29,
“Removing the Frame”, step 2) through the holes in the top of the
frame and into the corresponding holes in the top of the device.
3.
Insert the four larger screws through the holes in each side of the
frame and into the corresponding holes in the sides of the device.
4.
Tighten all six screws with a Phillips screwdriver.
When the device frame is attached securely:
After you attach the frame securely to the device, you can attach a
Keyguard or TouchGuide to the frame. See “Attaching the Keyguard” on
page 33 or “Attaching the TouchGuide” on page 36.
Screws