18/19
C 800
Wireless remote control (accessory)
GB 04705 - Edition 01 - April 12
«Start/Stop» button
«Start/Stop» button on the remote control works in the same way
as that situated on the leak detector. In any case, you have to
respect the instructions indicated in the Operating instruction
(
C 110
).
Pressing the button starts the leak test.
Pressing the button again during the measurement stops the test
Pressing at least 2 s on the button activates an air inlet
(
C 402
).
When a test is started, remote control
indicates detector mode displayed
on the leak detector control panel:
«Roughing detector» mode and then
«Measure» mode.
«Roughing» mode
«Calibration» mode
If the leak detector calibration is set
on «Starting», an autocalibration is
automatically launched after «Starting
detector» mode and this mode is
indicated on the remote control.
adixen Vacuum Products - ASM 380 Operating instructions
Summary of Contents for adixen ASM 380
Page 2: ......