4.2.4
Gradual Mode
Gradual mode allows the user to simulate continuous voltage/current changes to
execute ramp: select
Voltage Grad
to execute voltage ramp or
Current Grad
to
execute current ramp. Each Gradual set forms a ramp: the set value of
voltage/current of the Gradual set represents the end of the ramp, and its dwell time
represents the rise/fall time of the ramp.
Refer to Figure 4.15 and perform the followings to build a Gradual test:
1.
Select to perform
Voltage Grad testing
(click the icon
) or
Current
Grad testing
(click the icon
).
2.
Set
voltage
/
current
and
dwell time
for each step in
Gradual Set List
.
3.
Set the start number of Gradual set in
Start NO.
, end number of Gradual set in
End NO.
and the number of times the entire sets is repeated in
Cycle Times
.
4.
After all the settings are completed, click
ON
to start the output.
Figure 4.15 Gradual mode (OFF)