2.3.3
Output Connection
The cables to the load must be sufficiently large gauges, so they will not over-heat
while carrying the output current.
See Section 2.3.4 for output cable selection.
The location of DC output terminals is shown in Figure 2.3. Please perform the
following steps for output connection.
1.
Stop the product output, and ensure that the output voltage to be zero by
checking with a multimeter.
2.
Connect the DC output terminals
“
+
”
and
“
-
”
to the load accordingly.
3.
Ensure that the power cables are secured at both sides.
Figure 2.3 DC output terminals
DC Output Terminals
DC Output Terminals
DC Output Terminals
DC Output Terminals