Sets the value of output current amps. Press the white area
to display the numeric keyboard or press
for entry
Starts the output (output ON: green light ON; output OFF:
green light OFF)
Stops the output (output OFF: red light ON; output ON:
red light OFF)
Enters the Error Log page to view the error information
occurred during local operation. Refer to Section 3.9
Resets the protection. When an error occurs, correct it
first, and then reset the protection
Switches to remote operation (green light ON). Press again
to switch to local operation (green light OFF)
Locks the touch screen. Long press to unlock
Indicates operating at General mode
Enters the Function Page
Enters the Setting Page
Real time display. Refer to section 3.7.1 to set the time
display.
NOTICE
Before starting the output, make sure that output terminals are correctly
connected to the load.