SAFETY SUMMARY
The following general safety precautions must be observed during all phases of
operation, service, and repair of this equipment. Failure to comply with these
precautions or specific WARNINGS given elsewhere in this manual will violate safety
standards of design, manufacture, and intended use of the equipment.
Preen assumes no liability for the customer‘s failure to comply
with these
requirements.
1)
BEFORE APPLYING POWER
Verify that the equipment is set to match with the power line input.
2)
PROTECTIVE GROUNDING
Make sure to connect the equipment to the protective ground to prevent an
electric shock before turning on the power.
3)
NECESSITY OF PROTECTIVE GROUNDING
Never cut off the internal or external protective grounding wire, or disconnect
the wiring of protective grounding terminal. Doing so will cause a potential
shock hazard that may bring injury to a person.
4)
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the equipment in the presence of flammable gases or fumes.