3.2
Touch screen operation
The ADG-P series provides an intuitive touch screen HMI for easy operation and data
display. Manipulate the touch screen to enter input programming data or options by
pressing the items or icons shown on the screen directly
The touch screen can be disabled as well to avoid accidental touch while outputting.
Press the icon
to lock the screen, and the red light will be on. Long press
the icon
to unlock the screen, the red light will be off.
Use virtual numeric keyboard to set parameter values: select the parameter for
numeric value entry and the keyboard will pop up.
Move the keyboard: press the dark area on the top of the keyboard and press the
desired location on the screen afterwards, the keyboard will then move to the
designated location.
Figure 3.4 Virtual numeric keyboard
The descriptions for the items and the icons in the above figure are given as follows:
Displays the maximum and minimum value of the parameter
Confirms the entry
Clears all digits
Deletes the last digit
Closes the keyboard