Precor Experience 700 line Series, Service Manual

Page: 94 / 232

2. Remove the hood cover, see "Hood Cover Replacement" on page 60 .
3. Remove the four #3 Phillips fasteners and remove the Power Entry Assembly bracket
. Hold the bracket while removing to prevent wire cable damage. Retain fastener
hardware for installation.
4. Disconnect the ASL interface cable RJ11 connector, see "Wire Diagram" on page 83 .
5. Remove the ASL PCA Bracket
by pressing the inner and outer tab clips on the bot-
tom (underside) of the Power Entry Assembly Bracket while lifting the ASL bracket.
6. Unsnap the ASL PCA
board from the ASL PCA Bracket by pressing the outer
tab clip to remove.
Installation Instructions
Page 86
5 Replacement Procedures
ASL PCA Replacement