Precor Experience 700 line Series, Service Manual

Page: 34 / 232

SYSTEM TESTS TEST DESCRIPTION
TEST Tests belt operating condition in 0.1 speed increments
Test parameters:
• AMPS IN: Treadmill input Current.
• VOLTS IN: Treadmill input Voltage
• VBUSS: Treadmill internal buss Voltage
• AMPS MTR: Current supplied to the drive motor.
INCLINE TEST Menu path: MACHINE TEST > INCLINE TEST
Test parameters;
• A/D - lift motor incline position potentiometer A/D number.
• SEC - UP/DWN command response delay between the UPCA and
LPCA.
• Glitches - Momentary failures in the A/D potentiometer output. If there
are more than 50 Glitches, the lift motor should be replaced.
USB
1
Test List the active USB ports.
Touchscreen
Test Verify touchscreen operation.
Touchscreen Cal-
ibration Calibrates touchscreen finger press operation.
Backlight Test Tests the display backlight performance.
RGB Test Tests the display color performance.
Numeric Back-
light Test Tests the LED numeric display backlight brightness level.
Numeric Display
Test Tests the LED numeric display.
Heart Rate Tests the handlebar unfiltered, filtered, and pulse heart rate. Grasp the
grips to test the hand held heart rate. Use a Polar heart rate simulator to
test the wireless heart rate. Press the back button to exit this test.
Club Settings Service Menu (5651565)
Club Settings access code: 5,6,5,1,5,6,5 (see "Service Access Codes" on page 18 )
1
Short for Universal Serial Bus, is an industry standard developed in the mid-1990s that
defines the cables, connectors and communications protocols used in a bus for connection,
communication, and power supply between computers and electronic devices.
Page 26
3 Standard Service and Diagnostics Software
Club Settings Service Menu (5651565)