Precor Experience 700 line Series, Service Manual

Page: 19 / 232

For operator safety and to minimize electrostatic discharge conditions the AC frame ground
continuity must also be verified to be a low resistance connection to the AC distribution ground
bar.
Plugs and Receptacles (US and Canada installations)
Country Equipment Voltage Outlet/ Plug
1
Type
US & Canada 120 VAC: 50/60 Hz NEMA 5-20R/5-20P
US & Canada 240 VAC: 50/60 Hz NEMA 6-20R/6-20P
PVS (Personal Viewing System) displays
For equipment fitted with a PVS screen, a separate power connection is required. Using a 20
amp branch circuit, up to 10 displays can be connected. No other devices except PVS may be
connected to this circuit.
P62, P80, and P82
For self-powered equipment fitted with a P62, P80, and P82, a separate power connection is
required. Using a 20 amp branch circuit, up to ten consoles can be connected. No other
devices except P62, P80, and P82 may be connected to this circuit.
CATV RF Cable and Ethernet Requirements
1
Device power cord connector or electrical cable male connector that is inserted into an elec-
trical receptacle "outlet" (also called the plug-in).
Page 11
1 Introduction
General Information