Precor Experience 700 line Series, Service Manual

Page: 24 / 232

2 Operation Verification
This section provides a method to verify that the treadmill is operating correctly and can be
returned to service. Do these operation verification tests at the end of a maintenance pro-
cedure or whenever it is necessary to ensure that the machine is operating properly.
Operation Verification Tests.
Error Code Verification
Verify that there are no current active error codes logged for this unit.
1. Access either the Error Log or CPA
1
Event Log and record any current active logged
error codes, see "Error Log & CPA Event Log" on page 157 .
2. Resolve any current active logged error code issues.
3. On P10, P20, and P30 LED consoles:
Clear the Error Log, see "Error Log & CPA Event Log" on page 157 .
Console Hardware Validation Diagnostic Tests:
1. Access the Diagnostics Hardware Validation menu (access code 5,1,7,6,5,7,6,1) and
run the following tests:
On P10, P20, and P30 LED consoles:
l
KEYPAD TEST: Select KEYPAD TEST and follow prompts to run test.
l
DISPLAY TEST: Select DISPLAY TEST and follow prompts to run test.
l
INCLINE TEST: Select MACHINE TEST > INCLINE TEST and follow prompts
to run test.
l
BELT SPEED TEST: Select MACHINE TEST > BELT TEST and follow
prompts to run test.
l
HEART RATE TEST: Select HEART RATE TEST and follow prompts run test.
On P62, P80, and P82 touchscreen consoles:
l
NUMERIC BACKLIGHT TEST: Select SYSTEM TESTS > NUMERIC
BACKLIGHT TEST and follow prompts to run test
l
NUMERIC DISPLAY TEST: Select SYSTEM TESTS > NUMERIC DISPLAY
TEST and follow prompts to run test
l
INCLINE TEST: Select SYSTEM TESTS > INCLINE TEST and follow prompts
to run test
1
Control Processing Assembly
Page 16
2 Operation Verification
Operation Verification Tests.