PowerBoss, Inc.
Copyright 2008
Armadillo
®
SW/10XV
PB # 4100034 / Rev. 01A08
Page 56
Operation, Maintenance and Troubleshooting
TROUBLESHOOTING (CONTINUED)
PROBLEM
CAUSE
SOLUTION
Sweeper unit leaving debris
Broom bristles worn.
Check broom for wear and
(continued).
adjustment.
Poor performance of broom
Check for jam in broom
drive mechanism.
chamber.
Broom lift arms hung up
Clear out debris.
with debris.
Hopper flaps damaged or
Replace or adjust clearance.
missing.
Hopper out of adjustment.
Check hopper clearance.
Dust control filters clogged.
Clean filters.
Hopper does not raise or
Hydraulics system problem:
See Hydraulics Systems
lower.
•
control valve
Problems in this section.
•
gear pump
•
lift cylinder
•
relief valve
Hopper arms binding.
Lubricate or adjust arm
linkage.
