PowerBoss, Inc.
Copyright 2008
Armadillo
®
SW/10XV
PB # 4100034 / Rev. 01A08
Page 18
Operation, Maintenance and Troubleshooting
HOPPER FILTER
SHAKER BUTTON
HIGH DUMP
MODELS
ROTARY TRASH
RELOCATOR
(RTR™)
This button is used to activate the filter shakers prior to dumping
or as needed during sweeping operation. It is located to the left
hand side of the instrument panel.
To shake the filter:
1. Bring the machine to a complete stop.
2. Place the broom control lever in the OFF position.
3. Press and hold the filter shaker button for 20 to 30 seconds.
4. Place the broom control lever in the ON position and resume
sweeping.
Do not leave the hopper in the RAISE position for an extended
period of time.
The two far left levers on the front of the control panel are used to
raise the hopper to any height up to 60” (1.52 m) and dump it.
•
To raise the hopper, pull back Lever 1 to the RAISE position
and hold until the hopper raises to the proper height for the
dumpster or container.
•
To empty debris, pull back Lever 2 to the DUMP position to
rotate the hopper forward and empty the debris.
•
To rotate the hopper back, push Lever 2 forward to the
RETURN position until the hopper rotates and stops.
•
To lower the hopper, push Lever 1 forward to the LOWER
position until the hopper stops.
Rotary Trash Relocator (RTR™) is a standard feature on high-
dump models. Its purpose is to increase the holding capacity of
the debris hopper to make dumping the hopper necessary less fre-
quently.
D E B R I S H O P P E R D U M P C O N T R O L S
CAUTION
