PowerBoss, Inc.
Copyright 2008
Armadillo
®
SW/10XV
PB # 4100034 / Rev. 01A08
Page 29
Operation, Maintenance and Troubleshooting
S E RV I C E I N S T R U C T I O N S ( C O N T I N U E D )
A I R I N TA K E S Y S T E M
AIR FILTER REMOVAL
1.
Turn off the engine and set the parking brake.
2.
Lift the engine cover.
3.
Locate the air filter and unclamp the retaining clamp.
4.
Remove the dust cup.
5.
Pull the rubber plug out of the dust cup and empty the contents.
6.
Pull the air filter out of its housing.
AIR FILTER CLEANING
1.
Once you have removed the air filter, empty the dust cup and clean the interior
of the air filter housing.
2.
Use an air hose to blow out the air filter. Air pressure should be 100 psi or less.
AIR FILTER INSPECTION
1.
After you clean the air filter, check it for holes by passing a light bulb inside it.
AIR FILTER INSTALLATION
1.
Wipe out the air cleaner housing with a damp cloth. Be sure all dirt is removed.
2.
Install the cleaned replacement filter so that the fins are at the far end of the
housing. Be careful not to damage the fins.
3.
Replace the wing nut and tighten it.
4.
Replace the rubber plug in the dust cup.
5.
Replace dust cup, being sure embossed word “top” on cup is positioned correctly
(up).
6.
Tighten the ring clamp.
7.
Check the condition of intake hoses and clamps. Close engine cover.
