PowerBoss, Inc.
Copyright 2008
Armadillo
®
SW/10XV
PB # 4100034 / Rev. 01A08
Page 39
Operation, Maintenance and Troubleshooting
S E RV I C E I N S T R U C T I O N S ( C O N T I N U E D )
S W E E P C O M P O N E N T S ( C O N T I N U E D )
6.
Examine the polished pattern made by the broom on the test area.
A rectangular shape the length of the main broom, 2” (5.08 cm) wide, indi-
cates the main broom is properly adjusted. A pattern smaller then 2” (5.08
cm) indicates need for lower adjustment. A pattern wider than 2” (5.08 cm)
indicates a need for higher adjustment. If pattern is tapered from end to
end instead of rectangular, see Taper Adjustment on the next page.
Main Broom Test Pattern
MAIN BROOM HEIGHT ADJUSTMENT
1.
Turn the machine off and lock the parking brake.
2.
Position the main broom lever in the LOWER position.
The adjustment knob is located in the engine compartment on the broom
control handle pivot.
3.
Turn the broom adjusting knob clockwise one-eighth turn to free the wingnut.
4.
Turn the wingnut counter-clockwise to allow space for adjustment.
5.
Make a lower or higher adjustment with the knob as required.
6.
Retighten the wingnut.
7.
Repeat the main broom adjustment test to see that the broom is properly adjusted.
NOTE
NOTE
2” (5.08 cm)
