Power Master PM-1500SI-12X, User Manual

Page: 36 / 94

35
Chapter 4 User Constants
There are four “Macro Function” under the main menu of the “Stackable Inverter” and they are
“Operation”, “Initialize”, “Programming” and “Modified Constants”. The functions and their
contents are as below.
Function Content
Operation
“Stackable Inverter” can monitor AC IN voltage and current, AC
OUT voltage and current, battery voltage, battery current and
ripple voltage in charging and discharging battery and other
extension modules status. This is U (Monitor Group) constants.
Initialize
Operation Condition Setting Group A (Initialize) Group:
Multi-language setting, constants initialization setting and
constants modification allowed/prohibited setting.
Programming
Constant groups to program (modify) all the constants:
B (General) Group, C (INVERTER) Group,
D (AC CHARGER) Group, E (Aux-relay) Group
F (Solar charger) Group, G (DC to DC charger) Group
H (DC load control) Group and O (Operator) Group
Modified Constants
Operating the read-out and modification of the constants group
setting which are different from initial setting. Users can
program and modify constants
****
Operation of “Macro Function”
On any display screen, pressing DSPL key could have the effect just like ESC key to enable the
display screen go back to previous any of four “Macro Function”
(XXXXXXXX can be either Operation or Initialize or Programming or Modified Constants.)
And continue to press DSPL key to select “Macro Function”
*** Main Menu ***
XXXXXXXX