manualshive.com logo in svg

Potter UDACT-9100, Installation And Operation Manual, Page: 3 / 36

Share
Download
Potter UDACT-9100 Installation And Operation Manual Download Page 3

UDACT-9100 Dialer Installation and Operation Instructions

i

Table of Contents

Industry Canada and FCC Notice ........................................................................................... 1

Notice for all UDACTs Sold in Canada ................................................................................. 1
Industry Canada Notice ........................................................................................................ 1

Introduction and Features....................................................................................................... 3
Mechanical Installation and Dimensions ............................................................................... 4
Connections and Settings....................................................................................................... 5

UDACT-9100 MAIN BOARD:................................................................................................ 5

Field Wiring............................................................................................................................... 7

UDACT-9100 MAIN BOARD TERMINAL CONNECTIONS: ................................................. 7

Power Up Procedures.............................................................................................................. 8
Basic Operation and Supervision........................................................................................... 8
Configuration Setup................................................................................................................. 9

CONFIGURATION VIA ON-BOARD KEYPAD: .................................................................... 9
CONFIGURATION VIA a UIMA AND COMPUTER(LOCAL):............................................... 9
CONFIGURATION VIA MODEM AND COMPUTER(REMOTE): ......................................... 9

Configuration & LCD Operation.............................................................................................. 10

Entering the Passcode.......................................................................................................... 11
Command Menu ................................................................................................................... 11
1. View Event Log ................................................................................................................. 12
2. Clear Event Log (Command-Menu) .................................................................................. 12
3. Test Dialer (Command-Menu) .......................................................................................... 13
4. Config Info (Command-Menu) .......................................................................................... 15
5. Version Info....................................................................................................................... 15
6. Set Time (Command-Menu) ............................................................................................. 16
7. Set Password (Command-Menu)...................................................................................... 17
8. Default Config (Command-Menu) ..................................................................................... 17
9. Dialer Config (Command-Menu): ...................................................................................... 18
10. Exit (Command-Menu).................................................................................................... 23

Compatible Fire Alarm Control Panels .................................................................................. 26
Compatible Receivers.............................................................................................................. 26
Specifications........................................................................................................................... 27
Battery Calculations ................................................................................................................ 27
Warranty.................................................................................................................................... 28

firealarmresources.com

Summary of Contents for UDACT-9100





































Reviews:

No comments