Potter UDACT-9100, Installation And Operation Manual, Page: 27 / 36

UDACT-9100 Dialer Installation and Operation Instructions
23
Command Menu-->Dialer-Config
5. Dialer Enable/Disable
6. Ring Detection
10. Exit (Command-Menu)
Pressing “ENTER” after selecting “Exit from the main menu will return the UDACT-9100 to normal.
Command Menu/Dialer-Config/Enable/Disable
[X] ENABLE ->Default
[ ] DISABLE
The dialer is enabled by
default. When the dialer is
enabled or disabled, a
warning message appears.
Warning: The dialer cannot
report any event to the
monitoring station if it is
disabled.
Command Menu/Dialer-Config/Enable/Disable
[ ] Disabled
[ ] 1
[ ] 2
[ ] 3
[ ] 4
[X] 5->Default
[ ] 6
[ ] 7
[ ] 8
Use this menu item to select
the number of rings on which
the panel’s modem will
answer. The default number of
rings is five. The maximum
number of rings you can define
is eight.
If you select the “Disabled”
option, the modem will be
disabled and the panel will not
pick up the incoming call.
Enable/Disable
[X] Enable
- - - - - - W a r n i n g - - - - - - -
D i a l e r D i s a b l e d ! ! !
[ X ] 5
- R i n g D e t ec t N u m b e r -
firealarmresources.com