manualshive.com logo in svg

Polycom V500, Administrator'S Manual, Page: 95 / 146

Share
Download
Polycom V500 Administrator'S Manual Download Page 95

 System Usage and Statistics

6 - 3

Call Status

The Call Status screen provides call connection information. The spheres on 

the screen provide details for each line. When you place a call, you’ll see the 

status change as the call connects.

To view the Call Status screen:

•

Go to 

System > Diagnostics > Call Statistics

.

•

View Call Status during a call by pressing

 Help

 on the remote control.

You can highlight the spheres on this screen to see the number dialed, the 

relevant status code, and details of any errors.

Content Statistics

The Content Statistics screen shows statistics for content shared during a call. 

This screen does not display transmit statistics for Content IP.

To view the Content Statistics screen:

•

Go to 

System > Diagnostics > Call Statistics 

and then select 

 three 

times.

•

View Content Statistics during a call by pressing 

 

Help 

on the remote 

control.

Recent Calls

When the 

Call Detail Report

 setting is enabled, Recent Calls shows a list of up 

to 99 calls made by the system. It includes the following information:

•

Site name or number

•

Date

•

Time

•

Call in or out

The Recent Calls list shows incoming and outgoing calls that connect, as well 

as outgoing calls that do not connect.
If Do Not Disturb has been enabled, any incoming calls attempted by other 

sites will not be listed.

Summary of Contents for V500



















































































































































Reviews:

No comments