Polycom V500, Administrator'S Manual, Page: 24 / 146

Administrator’s Guide for the V500 System
3 - 8
To configure a NETGEAR router:
1.
These steps are for a NETGEAR MR814v2 or RP614v2 router. If you have
a different model, the settings in these steps may vary slightly.
2.
In a browser such as Internet Explorer, type the IP address of your router,
which you can find in your router’s documentation.
3.
Log in to your router setup using the user name and password, which
you can find in your router’s documentation.
4.
From the Advanced menu on the left of the page, select Port Forwarding .
5.
On the Port Forwarding page, select Add Custom Service .
6.
On the Ports-Custom Services page, enter this information for the first
port you need to open (such as port 1720):
7.
Click Apply .
8.
Repeat Steps 5 through 7 of this procedure for the remaining ports that
you need to open. (For the list of ports that you need to open, see the table
on page 3-7 .)
9.
When you have opened and assigned all of the ports listed in the table on
page 3-7 , review the Port Forwarding page. Check that all the ports are
correct, enabled, and assigned to the correct Server IP (internal) Address.
Setting Description
Service Name Any unique identifier (for example, you can use the
text from the Function column in the previous table).
Start Port The specific port or the starting value of the range of
ports (see the previous table for the list of ports).
End Port The specific port or the ending value of the range of
ports (see the previous table for the list of ports).
Server IP Address The IP address that the NAT has assigned to your
system.
NETGEAR routers automatically pass TCP and UDP traffic through the same port.
You do not have to designate TCP or UDP when you open ports.